Printer Switch 03 (SP No. 1-103-004)
No Function Comments
0* Length reduction of received data
0: Disabled
1: Enabled
0: Incoming pages are printed without length
reduction.
(Page separation threshold: Printer Switch 03, bits 4
to 7)
1: Incoming page length is reduced when printing.
(Maximum reducible length: Printer Switches 04, bits
0 to 4)
1-3 Not used Do not change the settings
4
to
7
Page separation setting when sub
scan compression is forbidden
00-0F (0-15 mm: Hex)
Default: 6 mm
Page separation threshold (with reduction disabled
with switch 03-0 above).
For example, if this setting is set to "10", and A4 is the
selected paper size:
If the received document is 10 mm or less longer than
A4, then the 10 mm are cut and only 1 page prints.
If the received document is 10 mm longer than A4,
then the document is split into 2 pages.
* This setting can be used for the client-side machine which has no FCU.
Printer Switch 04 (SP No. 1-103-005)
No Function Comments
Bit Switches - 2
91
To Next Page
Loading...
