1-7 Not used. Do not change the settings.
* This setting can be used for the client-side machine which has no FCU.
Printer Switch 07 (SP No. 1-103-008)
No Function Comments
0-3 Not used. Do not change the settings.
4 Receiver name printed on the
transmission result report
Selects the printing target on the transmission result
report.
0: All receivers
1: Printing only receivers which have received fax
transmission.
5-7 Not used. Do not change the settings.
Printer Switch 08 - Not used (do not change the settings)
Printer Switch 09 - Not used (do not change the settings)
Printer Switch 0A - Not used (do not change the settings)
Printer Switch 0B - Not used (do not change the settings)
Printer Switch 0C - Not used (do not change the settings)
Printer Switch 0E (SP No. 1-103-015)
No Function Comments
0* Paper size selection priority
0: Width
1: Length
0: A paper size that has the same width as the
received data is selected first.
1: A paper size which has enough length to
print all the received lines without reduction is
selected first.
1* Paper size selected for printing A4 width
fax data
0: 8.5" x 11" size
1: A4 size
This switch determines which paper size is
selected for printing A4 width fax data, when
the machine has both A4 and 8.5" x 11" size
paper.
Bit Switches - 2
93
To Next Page
Loading...
