Reading the Display and Using Keys
This section explains how to read the display and use the selection keys for the initial copy display.
• The copy display is set as the default screen when the machine is turned on.
1. Selection keys
Correspond to items at the bottom line on the display.
Example: initial copy display
•
When the instruction "press [100%]" appears in this manual, press the left selection key.
• When the instruction "press [R/E]" appears in this manual, press the center selection key.
• When the instruction "press [Auto R/E]" appears in this manual, press the right selection key.
2. [Escape] key
Press to cancel an operation or return to the previous display.
3. [OK] key
Press to set a selected item or entered numeric value.
4. Scroll keys
Press to move the cursor to each direction one by one.
When the [
], [ ], [ ], or [ ] key appears in this manual, press the scroll key of the same direction.
24
To Next Page
Loading...
