Ricoh MP 1813L - Advanced Copier Functions; Adjusting Image Density; Selecting Original Type Setting

• If you make a mistake, press the [Clear/Stop] key, and then enter the value again.
4.
Enter the vertical size of the original using the number keys, and then press the [OK] key.
The "Programmed" message appears.
When copying onto special paper
1.
Select [Paper Type] using the [
] or [ ] key, and then press the [OK] key.
2. Select the paper type, and then press the [OK] key.
The "Programmed" message appears.
When copying onto envelopes
1.
Select [Paper Size] using the [
] or [ ] key, and then press the [OK] key.
2. Select [Regular Size] using the [ ] or [ ] key, and then press the [OK] key.
2. Copying
48