1. Press the [Duplex] key.
2. Select the setting of original and copy type using the [ ] or [ ] key, and then press the
[OK] key.
3. Select the orientation using the [ ] or [ ] key, and then press the [OK] key.
• You can select the orientation of originals and copying paper when [Always Specify] is
specified for [Orientation] under [Copier Features] (User Tools). See page 92 "Orientation".
If it was not specified for, proceed to step 5.
4. When selecting two-sided copying, select the orientation [Top to Top] or [Top to Bottom]
using the [ ] or [ ] key, and then press the [OK] key.
• To change the copy orientation, select the original icon whose orientation is that required. See
page 60 "Original orientation and completed copies".
Copier Functions
61
To Next Page
Loading...
