*1
You cannot load side-opening envelopes in the orientation in Trays 3 and 4.
When loading envelopes, specify the envelope size and thickness. For details, see page 85
"Copying onto Envelopes".
In printer mode
The way to load envelopes varies depending on the orientation of the envelopes. When printing
onto envelopes, load them according to the applicable orientation shown below:
How to load envelopes
Types of envelopes Trays 2–4 Bypass tray
Side-opening
envelopes
• Flaps: open
• Bottom side of envelopes:
toward the right of the
machine
• Side to be printed: face up
• Flaps: open
• Bottom side of envelopes:
toward the left of the machine
• Side to be printed: face down
Side-opening
envelopes
*1
• Flaps: closed
• Bottom side of envelopes:
toward the back of the
machine
• Side to be printed: face up
• Flaps: closed
• Bottom side of envelopes:
toward the back of the
machine
• Side to be printed: face down
*1
You cannot load side-opening envelopes in the orientation in Trays 3 and 4.
When loading envelopes, select "Envelope" as the paper types using both [Tray Paper Settings]
and printer driver and specify the thickness of envelopes. For details, see page 113 "Printing on
Envelopes".
To print on envelopes that are loaded with their short edges against the machine body, rotate the
print image by 180 degrees using the printer driver.
Recommended Paper Sizes and Types
165
To Next Page
Loading...
