Messages Causes Solutions
"Cannot display preview of
this page."
The image data may have
been corrupted.
Press [Exit] to display the preview
screen without a thumbnail.
If the selected document contains
several pages, press [Switch] on the
"Display Page" area to change the
page, and then a preview of the next
page will appear.
"Cannot punch this paper
size."
The Punch function cannot
be used with paper size
selected.
For details about paper sizes, see
"Specifications for Punch Unit (Internal
Finisher SR3130)", Maintenance and
Specifications.
"Cannot staple paper of this
size."
The Staple function cannot
be used with paper size
selected.
Select an appropriate paper size. For
details about paper sizes, see
"Specifications for Internal Finisher
SR3130" and "Specifications for
Finisher SR3180", Maintenance and
Specifications.
"Check paper size." An irregular paper size is
set.
If you press the [Start] key, the copy
will start using the selected paper.
"Duplex is not available with
this paper size."
A paper size not available in
Duplex mode has been
selected.
Select an appropriate paper size. For
details about paper sizes, see
"Specifications for the Main Unit",
Maintenance and Specifications.
"Exceeded the maximum
number of sheets that can be
used. Copying will be
stopped."
The number of pages the
user is permitted to copy has
been exceeded.
For details about how to check the
number of copies available per user,
see Security Guide.
"File being stored exceeded
max. number of pages per
file. Copying will be
stopped."
The scanned originals have
too many pages to store as
one document.
Press [Exit], and then store again with
an appropriate number of pages.
Messages Displayed When Using the Copy/Document Server Function
183
To Next Page
Loading...
Need help?
General
