Messages Causes Solutions
"Load following paper in n.
To cancel job, press [Job
Reset]."
(A figure is placed at n.)
The printer driver settings are
incorrect or the tray does not
contain paper of the size
selected in the printer driver.
Check that the printer driver settings
are correct, and then load paper of
the size selected in the printer driver
into the input tray. For details about
how to change the paper size, see
"Changing the Paper Size", Paper
Specifications and Adding Paper.
"Paper in staple tray. Open
cover and remove paper."
If printing is stopped before it
is finished, paper may remain
in the finisher.
Remove the paper remaining in the
finisher.
"Paper size and type are
mismatched. Select another
tray from the following and
press [Continue]. To cancel
job, press [Job Reset].
Paper size and type can
also be changed in User
Tools."
The printer driver settings are
incorrect or the tray does not
contain paper of the size or
type selected in the printer
driver.
• Check that the printer driver
settings are correct, and then
load paper of the size selected in
the printer driver into the input
tray. For details about how to
change the paper size, see
"Changing the Paper Size",
Paper Specifications and Adding
Paper.
• Select the tray manually to
continue printing, or cancel a
print job. For details about how
to select the tray manually, or
cancel a print job, see "If an
Error Occurs with the Specified
Paper Size and Type", Print.
"Paper size of n is
mismatched. Select another
tray from the following and
press [Continue]. Paper
type can also be changed
in User Tools."
(A tray name is placed at
n.)
The size of the paper in the
tray does not match the paper
size specified in the printer
driver.
Select a tray containing paper that is
the same size as the specified paper
size.
"Parallel I/F board has a
problem."
An error has occurred in the
IEEE 1284 interface board.
Turn off the power, and then back on
again. If the message appears again,
contact your service representative.
Messages Displayed When Using the Printer Function
197
To Next Page
Loading...
Need help?
General
