Ricoh MP C2003 Series User Guide

Messages Causes Solutions
"Error has occurred in the
scanner driver."
An error has occurred in the
driver.
• Check whether the network cable
is connected correctly to the client
computer.
• Check whether the Ethernet board
of the client computer is
recognized correctly by
Windows.
• Check whether the client
computer can use the TCP/IP
protocol.
"Error has occurred in the
scanner."
The application-specified
scan conditions have
exceeded the setting range
of the machine.
Check whether the scanning settings
made with the application exceed the
setting range of the machine.
"Fatal error has occurred in
the scanner."
An unrecoverable error has
occurred on the machine.
An unrecoverable error has occurred
in the machine. Contact your service
representative.
"Insufficient memory. Close
all other applications, then
restart scanning."
Memory is insufficient. • Close all the unnecessary
applications running on the client
computer.
• Uninstall the TWAIN driver, and
then reinstall it after restarting the
computer.
10. Troubleshooting
220

Ricoh MP C2003 Series Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Size	A3
Copy Resolution	600 x 600 dpi
Duplex Printing	Yes
Print Technology	Laser
Print Speed	20 ppm (A4)
Scanner Resolution	600 dpi
Network Connectivity	Ethernet
Functions	Print, Copy, Scan
Operating System Compatibility	Windows, Mac, Linux
Scan Speed	54 images per minute
Control Panel	9-inch color touchscreen