No. Icon Description
5 Press to clear your current settings.
6 Press to display the preview screen after scanning originals.
7 You can check the settings in Send Settings.
8
Press to open the send settings screen. For details, see page 50
"[Send Settings] screen".
9
Press to scan originals and start sending.
10
Press to switch the section of the Address Book.
11
Shows the destinations in the Address Book.
If a password or protection code is specified to a folder destination,
enter the password or protection code on the screen displayed after
tapping the folder destination.
12 The sections of the Address Book.
13
Press to add a destination.
Destinations can be added as follows:
• Input destinations manually
• Select from the transmission history
• Specify a registration number from the Address Book
• Search for a destination in the Address Book or on the LDAP server
[Send Settings] screen
You can switch the four screens described in this section by flicking the screen up or down.
The items on the screen vary depending on the machine's settings.
2. Getting Started
50
To Next Page
Loading...
