Ricoh MP C5503 Administrator's Guide

7. Specifying [Facsimile Features]
The administrator must specify the settings in [Facsimile Features] within the ranges shown in the
following table.
For details about how to specify the settings, see "Facsimile Features", Fax.
Tab Item Settings
Initial Settings Menu Protect [Level 2]
General Settings Box Setting Set all items to [* Not Programmed].
Send Settings Backup File TX Setting [Off]
Reception Settings Reception File Settings
Store
[On]
Reception Settings Reception File Settings
Forwarding
[Off]
Reception Settings Reception File Settings
Print
[Off]
Reception Settings Reception File Settings
Memory Lock Reception
[Off]
Initial Settings Parameter Setting
switch 40, bit 0
[1]
If the memory for stored received faxes
become full, the MFP stops receiving new
faxes and keeps the stored ones without
printing or deleting them.
Initial Settings Parameter Setting
switch 10, bit 0
[1]
Only users who are authorized by the
administrator can access, from the
control panel, received faxes that are
stored.
Initial Settings Parameter Setting
switch 04, bit 7
[0]
If this is enabled, previews will not be
included in the reports.
Initial Settings Internet Fax Setting [Off]
Initial Settings Email Setting [On]
1. Notes for Administrators
20

Ricoh MP C5503 Specifications

General

Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	Standard: 1, 200 sheets, Maximum: 4, 700 sheets
Monthly Duty Cycle	300, 000 pages
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Duplex Printing	Yes
Automatic Document Feeder (ADF)	Yes
ADF Capacity	100 sheets
Mobile Printing Support	Yes
Print Speed	55 ppm
Fax Resolution	200 x 200 dpi
Connectivity	USB, Ethernet
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter
Scan Speed	80 ipm