Ricoh MP C6004 series User Manual

Message Cause Solution
"HDD Full" The hard disk became full
while you were printing a
Sample Print, Locked Print,
Hold Print, or Stored Print
file.
Delete unneeded files stored on the
machine.
Alternatively, reduce the data size of
the Sample Print, Locked Print, Hold
Print, or Stored Print file.
"HDD is full. (Auto)" The hard disk became full
while you were using the
error job store function to
store Normal Print jobs as
Hold Print files.
Delete unneeded files stored on the
machine.
Alternatively, reduce the data size of
the Temporary Print file and/or the
Stored Print file.
When there is not enough memory
Message Cause Solution
"84: Error" There is no work area
available for image
processing.
Decrease the number of files sent to the
machine.
"92: Error" Printing was canceled
because [Job Reset] or
[Stop] was selected on the
machine's control panel.
Perform the print operation again if
necessary.
When there is a problem with a parameter
Message Cause Solution
"86: Error" Parameters of the control
code are invalid.
Check the print settings.
10. Troubleshooting
218

Ricoh MP C6004 series Specifications

General

Print Speed (Black)	60 ppm
Print Speed (Color)	60 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed (Black)	60 ppm
Copy Speed (Color)	60 ppm
Copy Resolution	600 x 600 dpi
Fax Resolution	200 x 200 dpi
Duplex Printing	Yes
Automatic Document Feeder (ADF)	Yes
ADF Capacity	100 sheets
Memory (RAM)	2 GB
Hard Disk Drive	320 GB
Type	All in One Printer
Scan Resolution	600 dpi
Paper Capacity	4, 700 sheets
Standard Paper Capacity	1, 200 sheets
First Print Time (Color)	5.5 seconds
Connectivity	USB, Ethernet
PDL	PCL 5c, PCL 6, PostScript 3