When the user lacks privileges to perform an operation
Message Cause Solution
"No response from the
server. Authentication has
failed."
A timeout occurred while
connection to the server was
being established for LDAP
authentication or Windows
Authentication.
Check the status of the server.
"Printing privileges have not
been set for this document."
You have no privileges to
print the PDF document you
tried to print.
Contact the owner of the document.
"You do not have a privilege
to use this function. This job
has been cancelled."
The entered login user name
or login password is not
correct.
Check that the user name and
password are correct.
"You do not have a privilege
to use this function. This job
has been cancelled."
The logged in user is not
allowed to use the selected
function.
For details about how to set
permissions, see "Configuring User
Authentication", Security Guide.
"You do not have a privilege
to use this function. This
operation has been
cancelled."
The logged in user does not
have the privileges to
register programs or change
the paper tray settings.
For details about how to set
permissions, see "Configuring User
Authentication", Security Guide.
When a user cannot be registered
Message Cause Solution
"Auto-registration of user
information has failed."
Automatic registration of
information for LDAP
Authentication or Windows
Authentication failed
because the Address Book is
full.
For details about automatic registration
of user information, see "Auto
Registration to the Address Book",
Security Guide.
Messages Displayed When You Use the Printer Function
219
To Next Page
Loading...
Need help?
General
