• If you push [Exit] (or the [0] key), you go back to the usual operation screen.
•
Push the [Start] key on the operation panel to select and download all the options shown on
the screen.
• Push the [Clear] key on the operation panel if you want to cancel your selections and make
new ones.
• "ROM": This is the number and other version information of the ROM firmware installed in the
machine at this time.
• "NEW": This is the number and other version information of the firmware on the SD card.
7. With the selected items shown in reverse color, push the [Update] button or the [#] key on the
operation panel to start the update.
After you push [Update]:
• The middle bar shows the name of the module that the machine updates at this time. (The
example above shows that the machine updates the "Printer" module at this time.)
•
The bottom bar is a progress bar. The "_" marks in the progress bar are replaced by "*"
marks. This progress bar cannot be displayed during the firmware update for the operation
panel. But, the LED of the [Start] key on the operation panel changes from red to green to
show that the update of the operation panel firmware continues.
• When the update is completed, you will see this screen.
Software Update
827
To Next Page
Loading...
Need help?
General