10
Connecting to the devices using the Open
system or Shared Key authentication
6. Enter the encryption key and ID using the number keys, and
then press the [OK] key.
Shared Key
Key: (5 - 26)
Password
ID: (Enter 1-4)
For details about checking the encryption key, see "Checking the
SSID and Encryption key".
The ID is used for identifying the encryption key. You can
register four encryption keys (ID 1 to 4).
7. Press the [OK] key.
(OK/Back)
Are you sure to connect?
8. Check the result.
Connection has succeeded:
Connect succeed!
Connection has failed:
Connect failed!
9. Press the [ ] or [ ] key to select [Quit Setup], and then the
[OK] key.
10. Press the [
] or [ ] key to select [Yes], and then the [OK]
key.
Network Wizard
Do not auto display
Menu from next time
Yes No
11. Configuring the Wireless (Wi-Fi) settings is complete.
To use the printer driver, install the printer driver
according to the procedure on page 19 "4. Installing the
Printer Driver".
Easy Setup Using the WPS Button
M 320FB/320F
● Make sure the Ethernet cable is not connected to the
machine.
● In Steps 7 to 9, congure each setting within two
minutes.
The following item is necessary to set up a Wireless
(Wi-Fi) connection.
● Router (access point)
1. Check that the router (access point) is working correctly.
2. Make sure the wireless LAN option is attached to the
machine and the wireless (Wi-Fi) connection is enabled.
For details, see page 6 "Attaching the wireless LAN option".
3. Press [Quick Setup].
For details about [Detailed Setup], see User's Guide.
4. Press [Change Wi-Fi Connection Mode].
5. Press [WPS].
6. Press [PBC].
7. Press [Connect].
“Please wait for 2 minutes” appears, and the machine starts to
connect in PBC method.
8. Press the WPS button on the router (access point) within
two minutes.
WPS
• For details about how to use the WPS button, refer to the manuals for
the router (access point).
To Next Page
Loading...
Need help?
General
