Ricoh P WU5760 User Manual

English
59
English
User Settings
3D
3D Sync Invert
Use this option to enable/disable the 3D sync invert function.
3D Sync Invert On Off

Off: Choose “Off” for default frame contents.

On: Choose “On” to invert left and right frame contents.
3D Format
Use this option to select the appropriate 3D format content.
Enter ExitSelect
3D Format
Auto
Side-by-Side
Top and Bottom
Frame Sequential

Auto: Use this mode to let the system to automatically select the
appropriate 3D format content.

Side by Side (Half): Use this mode for “Side by Side (Half)”
format 3D content.

Top and Bottom: Use this mode for “Top and Bottom” format 3D
content.

Frame Sequential: Use this mode for “Frame Sequential” format
3D content.
Compatible 3D
source, 3D content
and Optical 3D glasses
are required for 3D
viewing.
“3D Sync Invert”
is only available when
3D is enabled.
This setting may
need to change when
re-start running 3D
movie.
3D function
is turned on
automatically when
Blu-ray 3D source is
input.
N
o
t
e
3D Sync Invert
3D
Select Enter Exit
3D Format
Off
Auto

Ricoh P WU5760 Specifications

General

Resolution	WUXGA (1920 x 1200)
Projection Technology	DLP
Lamp Life	20000 hours (Eco mode)
Input Terminals	HDMI, VGA
Output Terminals	VGA