Message Cause Solution and reference
"Collate: Page max." The amount of free memory is
insufficient to perform collating.
Reduce the number of pages to
be printed.
"Excd Prt Vol Use max count." Printing was canceled because
the print maximum number was
reached.
See "Specifying Maximum Print
Volume Use of Each User", User
Guide (Full Version).
Maximum number of user codes
that can be registered has been
reached.
Delete unnecessary user codes.
"File System Error." PDF direct printing could not be
performed because the file
system could not be obtained.
Turn the machine off, and then
turn it on again. If the message
appears again, consult your
service representative.
"HDD is full." The hard disk became full while
printing a Sample Print, Locked
Print, Hold Print, or Stored Print
file. Delete unnecessary files
stored in the machine.
Reduce the data size of the
Sample Print, Locked Print, Hold
Print, or Stored Print file.
When printing with the
PostScript 3 printer driver, the
hard disk capacity for fonts and
forms has been exceeded.
Delete unnecessary forms or
fonts registered to the machine.
"HDD not installed." The printer received a stored
job file but no hard disk is
installed.
Consult your sales or service
representative.
"I/O buffer overflow." An input buffer overflow
occurred.
• Select [Font Priority] for
[Memory Usage] in
[System].
• In [I/O Buffer] under the
[Host Interface] menu, set
the maximum buffer size to
a larger value.
• Reduce the number of files
being sent to the machine.
5. Troubleshooting
120
To Next Page
Loading...
