6
102
Settings
Select the file format to change to when P is pressed
for each [File Format] setting.
1
Set [RAW/Fx Button] to [One Push File Format]
in Step 3 of “Setting the Button Operation” (p.100).
2 Select Z or Y for [Cancel after 1 shot].
3 Select the file format when
P is pressed.
The left side is the [File Format]
setting and the right side is the
changed file format when P
is pressed.
Select the camera operation and type of information displayed
on the monitor when Digital Preview is displayed by pressing
P.
1 Set [RAW/Fx Button] to [Digital Preview] in Step 3
of “Setting the Button Operation” (p.100).
2 Press B and select Y or Z
for each display item.
Setting the One Push File Format
Z
The recording format returns to the original file
format after a picture is taken.
Y
The setting is retained until any of the following
operations is performed:
• When P is pressed again
• When 3 or F is pressed, or when the mode
dial or main switch is turned
RAW/Fx Button
Cancel after 1 shot
One Push File Format
Cancel
OK
Selecting the Display Settings for Digital Preview
RAW/Fx Button
Digital Preview
Zoom Review
Save Preview Image
Histogram Display
Highlight Alert
KS2_OPM_EN.book Page 102 Friday, February 20, 2015 12:10 PM
To Next Page
Loading...
