2
30
Getting Started
1 Pass the end of the strap
through the strap lug and
secure it on the inside
of the clasp.
2 Attach the other end in the same manner.
1 Make sure that the camera is turned off.
2 Remove the body mount
cover (1) and lens mount
cover (2).
After removing the cover, be sure
to put the lens down with the lens
mount side facing upward.
3 Align the lens mount indexes
(red dots: 3) on the camera
and the lens, and secure by
turning the lens clockwise
until it clicks.
Attaching the Strap Attaching a Lens
3
3
KS2_OPM_EN.book Page 30 Friday, February 20, 2015 12:10 PM
To Next Page
Loading...
