5
93
Sharing
1 Set the wireless LAN (Wi-Fi) function to ON
on the communication device.
Tap [PENTAX_xxxxxx] in the list of detected Wi-Fi
networks.
2 Enter the password, and tap
[Join].
A Wi-Fi connection is established
between the camera and
communication device.
3 Start Image Sync on the communication device.
Image Sync is started, and the list of images appears.
Flick left or right on the screen to change screens.
t Memo
• You can also change screens by tapping the buttons
displayed at the bottom of each screen.
When an iOS Device is Used
Screens of “Image Sync”
Application image list Camera image list
A mode
KS2_OPM_EN.book Page 93 Friday, February 20, 2015 12:10 PM
To Next Page
Loading...
