5
92
Sharing
1 Set the wireless LAN (Wi-Fi) function to ON
on the communication device.
2 Start Image Sync on the communication device.
The [Choose a Network] screen appears
on the communication device.
3 Tap [PENTAX_xxxxxx]
in the [Network List].
The [Enter Password] screen
appears.
4 Enter the password, and tap
[Connect].
A Wi-Fi connection is established
between the camera and
communication device.
The list of images appears on the
Image Sync screen.
t Memo
• Refer to [Communication Info] in [Wi-Fi] of the D3 menu for
the default password. (p.89)
When a Non-NFC-compatible Device is Used
KS2_OPM_EN.book Page 92 Friday, February 20, 2015 12:10 PM
To Next Page
Loading...
