3
62
Shooting
1 Press D in standby mode.
The Drive Mode screen appears.
2 Select T and press B.
3
Use
CD
to select
T
,
1
, or
U
.
Proceed to Step 7 when T is selected.
4 Press G.
5 Use CD to select the
operation mode.
6 Press E.
The screen of Step 2 reappears.
7 Set the bracket value.
Available operations
8 Press E.
The camera returns to standby mode.
9 Take three pictures.
After three pictures are taken, the camera returns
to standby mode in Step 8.
t Memo
• The bracket value can be set in increments of 1/3 EV steps
or 1/2 EV steps according to the [1 EV Steps] setting
of the E1 menu.
• The following settings for the Bracketing can be set
in the E2 menu.
Bracketing
1
Takes pictures with the self-timer.
U
Takes pictures with remote control.
±0.3EV±0.3EV
±
0.3EV±0.3EV
BracketingBracketing
CancelCancel
OKOK
Bracketing
Self-timer
Cancel
OK
Bracketing
Remote Control
Cancel
OK
R
Changes the bracket value (up to ±3 EV).
J→R Adjusts the exposure compensation
value.
M
Resets the compensation value
to the default setting.
8 Bracketing Order
Changes the shooting order
of the three pictures.
9 One-Push Bracketing
Takes all three pictures with
one release of the shutter.
KS2_OPM_EN.book Page 62 Friday, February 20, 2015 12:10 PM
To Next Page
Loading...
