EasyManua.ls Logo

Ricoh Pentax K-S2 - Correcting Images; Brightness Adjustment

Ricoh Pentax K-S2
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
74
Shooting
Expands the dynamic range and enables a wider range of tones
to be recorded by the CMOS sensor and reduces the
occurrence of overexposed/underexposed areas.
Set in the control panel or [D-Range Settings] of the A2 menu.
u Caution
When the sensitivity is set to less than ISO 200, [Highlight
Correction] cannot be set to [On].
t Memo
[Highlight Correction] in C mode can be set to [Auto] or [Off].
Takes three consecutive images at three different exposure
levels to create a single composite image with them.
1 Select [HDR Capture] in the control panel,
and press E.
The [HDR Capture] screen appears.
2 Use CD to select the type.
3 Press B, and use CD to set the range in which
to change the exposure.
4 Press E.
The control panel reappears.
5 Press F .
The camera returns to standby mode.
u Caution
This function cannot be used in some capture modes
or in combination with some other functions. (p.110)
[File Format] is fixed to [JPEG]. When [File Format] is set
to [RAW] or [RAW+], the setting is changed to [JPEG].
For HDR Capture, multiple images are combined together to
create a single image, so it may take time to save the image.
•In C mode, this function is available only when the drive
mode is set to [Interval Movie Record].
Correcting Images
Brightness Adjustment
Highlight Correction/Shadow Correction
v/A2
Highlight CorrectionHighlight Correction
AutoAuto
CancelCancel
OKOK
Shadow CorrectionShadow Correction
AutoAuto
CancelCancel
OKOK
HDR Capture
v/A1/C1
HDR Capture
Auto
Cancel
OK
KS2_OPM_EN.book Page 74 Friday, February 20, 2015 12:10 PM

Table of Contents

Other manuals for Ricoh Pentax K-S2

Related product manuals