5
95
Sharing
Tap an item and select a value
from the list.
4 When the focus mode is set to v, tap an area
where you want to perform autofocus in the Live
View image.
Autofocus is performed on the tapped area.
5 Tap the shutter release button.
The captured image is displayed as a thumbnail.
u Caution
• Shooting with Image Sync is not available in the following
situations.
• When the drive mode is set to other than [Single Frame
Shooting]
•In C mode
• When the camera is connected to a device via USB
or HDMI terminal
• When using the ASTROTRACER function
• The captured images are saved to the memory card inserted
in the camera and to the communication device with Image
Sync. Shooting cannot be performed if there is not enough
available space on the memory card.
t Memo
• Shooting can also be performed by tapping the Live View
image. Set in [Touch AF] on the [Settings] screen. (p.98)
You can view the images saved either in the camera
or in the communication device.
Viewing Images
1 Multiple image selection button
2 Album selector button
(available for the application image list only)
3 Operation modes
4 Settings (p.98)
5 NFC connection screen
1
2
4
5
3
KS2_OPM_EN.book Page 95 Friday, February 20, 2015 12:10 PM
To Next Page
Loading...
