3
56
Shooting
1 Press G in standby mode.
2 Select [AF Active Area] and press E.
The [AF Active Area] screen appears.
3 Select the desired focus
point selection mode and
press E.
The control panel reappears.
4 Press F .
The camera returns to standby mode.
If you selected E or 8 in Step 3, proceed to Step 5.
5 Select the desired AF point.
Available operations
t Memo
• When E or 8 is selected, the E lamp lights up.
• The AF point can also be changed from [AF Active Area]
of [AF Settings] in the A1 menu.
• You can also set the camera so that switching to the Change
AF Point mode by pressing and holding E can be operated
with P. (p.100)
Selecting the Focusing Area (AF Point)
v/A1
6
Auto (11
AF Points)
Out of the 11 AF points, the camera
automatically selects the optimum
focusing area.
7
Auto (5 AF
Points)
Out of the 5 AF points, the camera
automatically selects the optimum
focusing area.
E
Select
Sets the focusing area to the user
selected point from 11 points.
8
Expanded
Area AF
Sets the focusing area to the user
selected point from 11 points.
When the subject happens to move out
of the selected focusing area after being
focused, 8 peripheral points are used
as back-up points.
Not available in x mode.
D
Spot
Sets the focusing area to the center
of the 11 points.
AF Active Area
Auto (11 AF Points)
Cancel
OK
ABCD
Changes the AF point.
E
Returns the AF point to
the center.
Press and hold E Switches the function of
the arrow keys (ABCD)
to the Change AF Point mode
or the direct key operation.
1/
250
800
F
5.6
99999
KS2_OPM_EN.book Page 56 Friday, February 20, 2015 12:10 PM
To Next Page
Loading...
