Why is my Notebook or PowerBook computer screen not displaying a presentation on the Ricoh PJ LX3000ST?
Some Notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer’s documentation for detailed information.
What does a flashing red light on my Ricoh PJ LX3000ST Projector mean when powering up?
When the Ricoh Projector is powering up (warming up), the indicator light will flash red every 1.0 second.
Why does my Ricoh PJ LX3000ST Projector have no image on the screen?
If no image appears on the screen, ensure all the cables and power connections are correctly and securely connected. Also, check that the pins of terminals are not crooked or broken. Make sure you have removed the lens cap and the projector is switched on. Finally, ensure that the 'AV Mute' feature is not turned on.
General| Resolution | 1280 x 800 (WXGA) |
|---|---|
| Lamp Life (Normal) | 4000 hours |
| Display Technology | DLP |
| Zoom Ratio | 1.2x |
| Speakers | 10 W |
| Projection Size | 30 - 300 inches |
| Power Consumption (Normal mode) | 310 W |
| Power Consumption (Eco mode) | 220 W |
| Noise Level (Eco mode) | 28 dB |
| Max Resolution | 1920 x 1200 |
| Inputs | HDMI, VGA |
| Keystone Correction | Vertical ±40° |
To Next Page
