Ricoh PJ WX4130n User Manual (English)

Other manuals for Ricoh PJ WX4130n

Questions and Answers:

C
Carolyn ClarkeSep 7, 2025
What to do if Ricoh Projector remote control does not respond?
- T
  Timothy ChristianSep 7, 2025
  If the Ricoh Projector's remote control does not respond: * Ensure the ID assigned to the remote control matches the [Remote Control ID] setting in [Default Settings]. * Make sure the batteries in the remote control are not dead. * Ensure the batteries are correctly loaded into the remote control. * Make sure the remote control is within its effective range. * Ensure there are no obstructions between the remote control and the projector. * Make sure the remote control receiver is not exposed to strong light.
R
Rachel MorganAug 23, 2025
Why does my Ricoh PJ WX4130n display 'Hardware Error' and turn off?
- P
  Penny HicksAug 23, 2025
  If your Ricoh Projector displays a 'Hardware Error' and turns off, it indicates an internal malfunction. Disconnect the power cord, wait a while, and then turn the projector on again. If the problem persists, contact your service representative.
V
vincent08Aug 25, 2025
Why does my Ricoh PJ WX4130n lamp turn off?
- K
  Kimberly BrownAug 26, 2025
  If the Ricoh Projector lamp turns off or doesn't turn on, it could be due to overheating, expired service life, or a projector malfunction. Try disconnecting the power cord, waiting, and then turning the projector back on. If the lamp is burnt out, replace it.
C
Chad LopezAug 27, 2025
What to do if Ricoh PJ WX4130n Projector shows temperature error?
- D
  David MooreAug 27, 2025
  If the Ricoh Projector displays "Temperature Error" and turns off, ensure that the intake and exhaust vents are not blocked and that the projector is not being used in a high-temperature environment. Disconnect the power cord, wait, and then turn the projector on again.
P
pamela84Aug 27, 2025
What to do if Ricoh PJ WX4130n Projector turns off and flashes every second?
- C
  Chad GreeneAug 27, 2025
  If the Ricoh Projector turns off during operation or does not turn on and the interval is flashing every 1 second, the lamp cover may not be installed correctly. Disconnect the power cord and reinstall the lamp cover correctly.
S
Spencer PorterSep 17, 2025
Why no images from USB devices on Ricoh PJ WX4130n Projector?
- D
  Dr. Carolyn MilesSep 17, 2025
  To resolve issues with no images from USB devices on the Ricoh Projector: * Make sure the USB memory device is connected correctly. * Ensure the connected USB memory device is compatible with the projector. * Make sure there are JPEG or MPEG files saved on the USB memory device. * Ensure the compression format, file size, and other conditions are compatible with the projector.
D
Dawn HernandezSep 14, 2025
Why is Ricoh PJ WX4130n Projector color faded?
- D
  David McfarlandSep 14, 2025
  If the color is faded or the tint is poor on the Ricoh Projector: * Check the settings of [Color Saturation], [R-level], [G- level], and [B-level] in [Image Adjustment]. * Make sure the screen is clean. * Check the settings of [Wall Color Correction] in [Display Settings]. * Make sure the lamp is not near the end of its service life.
E
Evan UnderwoodSep 15, 2025
How to change language on Ricoh Projector?
- J
  Julie RiggsSep 15, 2025
  If the display language is unknown on the Ricoh Projector, press the [Menu] button, and then select the display language in [XXX/Language] (XXX differs from the current display language) under the tab.
G
Gregory FischerSep 6, 2025
Why Ricoh PJ WX4130n Projector power does not turn on?
- D
  Deanna BeckSep 6, 2025
  If the Ricoh Projector's power does not turn on, ensure the power plug or connector is correctly connected and the lamp cover is correctly mounted.
J
Joseph RichardsSep 3, 2025
How to troubleshoot no sound on Ricoh PJ WX4130n Projector?
- F
  Frank MelendezSep 3, 2025
  To troubleshoot a Ricoh Projector with no sound: * Press the [Input] button. * Ensure the mute function is not turned on. * Check the speaker's volume adjustment. * Make sure the computer or AV equipment is connected correctly. * Confirm the computer or AV equipment is working properly.