Using PostScript 3
70
3
❖ Document Server
Use this function to store hard disk documents that you want to print as well
as documents you might want to later combine or process for printing.
Note
❒ The “File Name” can contain to 16 alphanumeric (a-z, A-Z, 0-9) characters.
Reference
For details about the Document Server function, see "Accessing the Docu-
ment Server", Printer Reference.
How to Use Sample Print
Follow the procedure below to print a document using the Sample Print function.
Windows 95 / 98 / Me
A In the application, on the [File] menu, click [Print].
The [Print] dialog box appears.
B Select the printer, and then click [Properties].
C Click the [Setup] tab.
D In the [Job Type:] list, click [Sample Print].
E Click [Details...].
F In the [User ID:] box, enter a user ID using up to eight alphanumeric (a-z, A-
Z, 0-9) characters.
The user ID associates the user with his / her jobs.
G Click [OK].
H Click [OK] to close the printer properties dialog box.
I Set the number of copies to two or more, and then start the printing from
the application's [Print] dialog box.
The sample print job is sent to the machine and one set is printed.
J Check the printed output to make sure the settings are correct.
If the settings are correct, perform the following steps.
If you want to delete a saved job, see p.74 “Deleting a Sample Print File”.
K
On the machine's control panel, press the
{
Printer
}
key to display the printer screen.
L Press [Print Jobs].
To Next Page
Loading...
Need help?
General
