Ricoh Printer - Page 78

Adjusting the Printer
78
A Press the {Menu} key.
“Menu” appears on the display.
B Press the {U} or {T} key to display “Maintenance”, and then press the
{# Enter} key.
The maintenance menu appears.
C Press the {U} or {T} key to display “Color Calibrate”, and then press the
{# Enter} key.
D Press the {U} or {T} key to display “Reset”, and then press the {# Enter}
key.
A confirmation message is displayed.
E Press the {# Enter} key.
A message indicating the gradation correction value has returned to default,
is displayed.
After about 2 seconds, the display returns to the “Color Calibrate: Reset”
menu.
Menu:
Maintenance
Color Calibrate:
Reset
Press # to reset
Calibration
Calibration was
reset