16
D Press [TNext] to scroll through the list.
E Press [Paper Type: Bypass Tray].
F Press [OHP (Transparency)] on the [Paper Type] area when loading OHP trans-
parencies. Press [No Display] on the [Paper Type] area, and then press [Thick Pa-
per 1], [Thick Paper 2], or [Thick Paper 3] on the [Paper Thickness] area when
loading thick paper.
G Press [OK].
The paper type selected is displayed.
H Press the {User Tools/Counter} key.
The initial screen appears.
Note
❒ The settings made will remain valid until they are reset again. After print-
ing on OHP transparencies or thick paper, make sure to clear settings for
the next user.
❒ For printer driver settings, see the printer driver Help.
To Next Page
Loading...
