25 © 2012 Ricoh Americas Corporation. All Rights Reserved.
Cancelling Fax Stored to Memory
1.Press the [Facsimile] button on the control
panel of your Ricoh device.
2.Select [TX/RX Statue/Print]
3.Select [Check/Stop Transmission File].
4. A list of all fax messages that are in
standby mode (waiting to be sent) will
appear.
5.Select the transmission that you wish to
cancel by touching it.
6.Select [Stop Transmission], then select
[OK].
7. Select [Exit]
8. Select [Exit] again.
To Next Page
Loading...
