Ricoh Pro C5100S - Basic Procedure for Sending Scan Files by E-mail

• [Middle]
55.8 cpm
• [Low]
35.7 cpm
• In some cases, if you change this setting from [Low] to [Middle] or from [Middle] to [High], the
toner may not properly fuse to the paper.
• Depending on the type of paper, you can increase the toner gloss by changing this setting from
[High] to [Middle] or from [Middle] to [Low].
Setting Items Values
[Process Speed Setting] [Low]
[High]
[Middle]
16: [Registration Motor Feed Speed Adj]
Adjust the registration motor's speed.
The registration motor drives the registration roller that feeds paper to the paper transfer unit.
Use this to resolve image quality problems (such as image scaling errors or jitter
*1
).
Press [+] to increase the speed and [−] to reduce it.
If you change this setting, apply the same values to the following settings:
• 17: [First Transport Motor Feed Speed Adj]
• 18: [Second Transport Motor Feed Speed Adj]
• 19: [Third Transport Motor Feed Speed Adj]
• 20: [Relay Trnsprt Mtr Feed Speed Adj: CW]
• 21: [Relay Trnsprt Mtr Feed Speed Adj: CCW]
• 29: [2 sided Exit Motor Feed Speed Adj]
Setting Items Max. Value Min. Value Step Unit
[Registration Motor Feed Speed Adj] 3.0 -3.0 0.1 %
*1
The jitter occurs when the leading or trailing edge of paper that passes through the paper transfer unit is
transmitted to the drum unit via the immediate transfer belt, causing banding.
Setting Values
87