17: [First Transport Motor Feed Speed Adj]
Adjust the first transport motor's speed.
The first transport motor drives the roller in the paper transport path in Tray 1's paper feed unit.
Press [+] to increase the speed and [−] to reduce it.
Enter the same values that are specified for 16: [Registration Motor Feed Speed Adj].
Setting Items Max. Value Min. Value Step Unit
[First Transport Motor Feed Speed Adj] 3.0 -3.0 0.1 %
18: [Second Transport Motor Feed Speed Adj]
Adjust the second transport motor's speed.
The second transport motor drives the roller in the paper transport path in Tray 2's paper feed unit.
Press [+] to increase the speed and [−] to reduce it.
Enter the same values that are specified for 16: [Registration Motor Feed Speed Adj].
Setting Items Max. Value Min. Value Step Unit
[Second Transport Motor Feed Speed Adj] 3.0 -3.0 0.1 %
19: [Third Transport Motor Feed Speed Adj]
Adjust the third transport motor's speed.
The third transport motor drives the roller in the paper transport path in Tray 3's paper feed unit.
Press [+] to increase the speed and [−] to reduce it.
Enter the same values that are specified for 16: [Registration Motor Feed Speed Adj].
Setting Items Max. Value Min. Value Step Unit
[Third Transport Motor Feed Speed Adj] 3.0 -3.0 0.1 %
20: [Relay Trnsprt Mtr Feed Speed Adj: CW]
Adjust the relay transport motor's rotation speed (clockwise rotation).
The relay transport motor drives the relay transport roller, which feeds paper to the registration roller.
This setting is applied when paper is fed from the machine's paper tray or optional LCT/Wide LCT.
Press [+] to increase the speed and [−] to reduce it.
4. Details of Menu Items in Advanced Settings
88
To Next Page
Loading...
