Ricoh Pro C5100S - 2 Getting Started; Guide to Names and Functions of Components

2. Getting Started
This chapter describes how to start using this machine.
Guide to Names and Functions of Components
• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal
components.
Front and left view
CUV101
1
2
3
4
5
8
6
7
1. ADF
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
The ADF scans both sides of an original simultaneously.
2. Exposure glass
Place originals face down here.
25