Ricoh Pro C5110S - Page 149

004
Latest:L:GO *ENG [0 to 1023 / 0 / 1digit/step]
Displays Digital gain adjustment value (L side/GREEN/ODD Pixel).
White level adjustment will be done to keep hold of image signal’s dynamic range when
Scanner turns on.
Gain adjustment will be done hardwarelly by SBUs ASIC (SCAT) and be given, cause to
the fact that White level adjustment will Amplify or Attenuated image signal.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
4663 [Digital Gain Adjust]
001
Latest:F:BE *ENG [0 to 1023 / 0 / 1digit/step]
Displays Digital gain adjustment value (F side/BLUE/EVEN Pixel).
White level adjustment will be done to keep hold of image signal’s dynamic range when
Scanner turns on.
Gain adjustment will be done hardwarelly by SBUs ASIC (SCAT) and be given, cause to
the fact that White level adjustment will Amplify or Attenuated image signal.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
002
Latest:F:BO *ENG [0 to 1023 / 0 / 1digit/step]
Displays Digital gain adjustment value (F side/BLUE/ODD Pixel).
White level adjustment will be done to keep hold of image signal’s dynamic range when
Scanner turns on.
Gain adjustment will be done hardwarelly by SBUs ASIC (SCAT) and be given, cause to
the fact that White level adjustment will Amplify or Attenuated image signal.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
003
Latest:L:BE *ENG [0 to 1023 / 0 / 1digit/step]
Displays Digital gain adjustment value (L side/BLUE/EVEN Pixel).
White level adjustment will be done to keep hold of image signal’s dynamic range when
Scanner turns on.
Gain adjustment will be done hardwarelly by SBUs ASIC (SCAT) and be given, cause to
the fact that White level adjustment will Amplify or Attenuated image signal.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
SP4-XXX (Scanner)
147