Ricoh Pro C5110S - Page 154

003
Factory :L:BE *ENG [0 to 16383 / 0 / 1digit/step]
Display/Saves Factory Black level digital adjusting value (L side/BLUE/EVEN Pixel)
Factory Black level digital adjusting value from Main unit warranty process is saved.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
004
Factory :L:BO *ENG [0 to 16383 / 0 / 1digit/step]
Display/Saves Factory Black level digital adjusting value (L side/BLUE/ODD Pixel)
Factory Black level digital adjusting value from Main unit warranty process is saved.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
4677 [Analog Gain Adjust]
001
Factory :F:R *ENG [0 to 14 / 0 / 1digit/step]
Display/Saves Factory Analog gain adjusting value (F side/RED Pixel)
Factory Analog gain adjusting value from Main unit warranty process is saved.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
002
Factory :L:R *ENG [0 to 14 / 0 / 1digit/step]
Display/Saves Factory Analog gain adjusting value (L side/RED Pixel)
Factory Analog gain adjusting value from Main unit warranty process is saved.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
4678 [Analog Gain Adjust]
001
Factory :F:G *ENG [0 to 14 / 0 / 1digit/step]
Display/Saves Factory Analog gain adjusting value (F side/GREEN Pixel)
Factory Analog gain adjusting value from Main unit warranty process is saved.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
002
Factory :L:G *ENG [0 to 14 / 0 / 1digit/step]
Display/Saves Factory Analog gain adjusting value (L side/GREEN Pixel)
Factory Analog gain adjusting value from Main unit warranty process is saved.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
4679 [Analog Gain Adjust]
2. Main SP Tables-4
152