Ricoh Pro C5110S - Page 173

001
- ENG [0 to 255 / 0 / 1digit/step]
Displays White level; peak data (BLUE) for CIS.
Checks White level by scanning White basis roller witch is set to mach CIS DF powers ON.
Reading level of White basis roller from white level check is given.
When white level peak scanning value is abnormal, SC188-00 (White level error) is given.
Cause of error is shown in SP4-475-001.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
4793
[CIS Black Level Data: R]
Displays Black level; data (R: Chip1 to 24) for CIS.
Displays black scanning level by detecting black level scanning value of each CIS chip
from CIS’s black level check done when DF powers ON.
When Black level scanning value is abnormal, SC187-00 (Black level error) is given.
Cause of error is shown in SP4-475-001.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
001 Chip1 ENG [0 to 255 / 0 / 1digit/step]
002 Chip2 ENG [0 to 255 / 0 / 1digit/step]
003 Chip3 ENG [0 to 255 / 0 / 1digit/step]
004 Chip4 ENG [0 to 255 / 0 / 1digit/step]
005 Chip5 ENG [0 to 255 / 0 / 1digit/step]
006 Chip6 ENG [0 to 255 / 0 / 1digit/step]
007 Chip7 ENG [0 to 255 / 0 / 1digit/step]
008 Chip8 ENG [0 to 255 / 0 / 1digit/step]
009 Chip9 ENG [0 to 255 / 0 / 1digit/step]
010 Chip10 ENG [0 to 255 / 0 / 1digit/step]
011 Chip11 ENG [0 to 255 / 0 / 1digit/step]
012 Chip12 ENG [0 to 255 / 0 / 1digit/step]
013 Chip13 ENG [0 to 255 / 0 / 1digit/step]
SP4-XXX (Scanner)
171