Ricoh Pro C5110S - Page 180

001
Latest *ENG [0 to 8191 / 0 / 1digit/step]
Displays adjustment value of LED lighting duty (PWM) for LED light quantity adjustment.
Reduces light quantity when CCD’s output is overflowed from the amount of light, by
adjusting LED light source lighting duty when scanner powers ON.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
002
Factory Setting *ENG [0 to 8191 / 0 / 1digit/step]
Displays factory adjustment value of LED lighting duty (PWM) for LED light quantity
adjustment.
Factory adjustment values are saved from main unit warranty process.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
4851 [LED White Level Peak Read]
001
Latest:F:RE *ENG [0 to 1023 / 0 / 1digit/step]
Displays scanning values of White level peak (F side/RED/EVEN Pixel) for LED light
quantity adjustment.
Scanning levels of White basis board will be displayed when scanner powers on and LED
light source lighting duty (PWM) is adjusted.
When LED light quantity does not complete, SC102-00 is given.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
002
Latest:F:RO *ENG [0 to 1023 / 0 / 1digit/step]
Displays scanning values of White level peak (F side/RED/ODD Pixel) for LED light
quantity adjustment.
Scanning levels of White basis board will be displayed when scanner powers on and LED
light source lighting duty (PWM) is adjusted.
When LED light quantity does not complete, SC102-00 is given.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
2. Main SP Tables-4
178