003
Latest:F:GE *ENG [0 to 1023 / 0 / 1digit/step]
Displays scanning values of White level peak (F side/GREEN/EVEN Pixel) for LED light
quantity adjustment.
Scanning levels of White basis board will be displayed when scanner powers on and LED
light source lighting duty (PWM) is adjusted.
When LED light quantity does not complete, SC102-00 is given.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
004
Latest:F:GO *ENG [0 to 1023 / 0 / 1digit/step]
Displays scanning values of White level peak (F side/GREEN/ODD Pixel) for LED light
quantity adjustment.
Scanning levels of White basis board will be displayed when scanner powers on and LED
light source lighting duty (PWM) is adjusted.
When LED light quantity does not complete, SC102-00 is given.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
005
Latest:F:BE *ENG [0 to 1023 / 0 / 1digit/step]
Displays scanning values of White level peak (F side/BLUE/EVEN Pixel) for LED light
quantity adjustment.
Scanning levels of White basis board will be displayed when scanner powers on and LED
light source lighting duty (PWM) is adjusted.
When LED light quantity does not complete, SC102-00 is given.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
006
Latest:F:BO *ENG [0 to 1023 / 0 / 1digit/step]
Displays scanning values of White level peak (F side/BLUE/ODD Pixel) for LED light
quantity adjustment.
Scanning levels of White basis board will be displayed when scanner powers on and LED
light source lighting duty (PWM) is adjusted.
When LED light quantity does not complete, SC102-00 is given.
Use for design evaluation, analyzing cause of malfunction (abnormal images, SC).
SP4-XXX (Scanner)
179
To Next Page
Loading...
