5120
[Mode Clear Opt. Counter Removal]
This program updates the information on the optional counter. When you install or remove
an optional counter, check the settings.
001 0: Yes 1: Standby 2: No *CTL
[0 to 2 / 0 / 1/step]
0: Yes (removed)
1: Standby (installed but not used)
2: No (not removed)
5121
[Counter Up Timing]
This program specifies when the counter goes up. The settings refer to “paper feed” and
“paper exit” respectively.
001 0:Feed 1:Exit *CTL
[0 or 1 / 0 / 1/step]
0: Feed
1: Exit
5126
[Set F-size Document]
SP for assigning sizes for F-size document.
001 - *ENG
[0 to 2 / 0 / 1/step]
0: Judges as Foolscap 8 1/2"x13"
size. (Default)
1: Judges as Folio 8 1/4"x13" size.
2: Judges as F 8"x13" size.
5127
[APS Mode]
This program disables the APS.
001 - *CTL
[0 or 1 / 0 / 1/step]
0: Not disabled
1: Disabled
5128
[Copy Mode With Key/Card Option]
-
SP5-009 to 721 (Mode)
223
To Next Page
Loading...
