Ricoh Pro C5110S - Page 226

001 - *CTL [- / 0 / -]
5131
[Paper Size Type Selection]
The program selects a paper size system from the following alternatives: the AB system (0),
the LT system (1), and the AF system (2).
001 - *ENG
[0 to 2 / 2 / 1/step]
0: DOM(Japan)
1: NA
2: EU
5150
[Bypass Length Setting]
Determines whether the transfer sheet from the by-pass tray is used or not.
Normally the paper length for sub scanning paper from the by-pass tray is limited to 600
mm, but this can be extended with this SP to 1260 mm.
001 0: OFF 1: ON CTL
[0 or 1 / 0 / 1/step]
0: OFF
1: ON
5162
[App. Switch Method]
Determines whether the application screen is switched with a hardware switch or software
switch.
001 - *CTL
[0 or 1 / 0 / 1/step]
0: Soft Key Set
1: Hard Key Set
5165
[Z-fold Position]
Determines whether the application screen is switched with a hardware switch or software
switch.
001 A3T - [2.0 to 25.0 / 2.0 / 0.1mm/step]
002 B4T - [2.0 to 25.0 / 2.0 / 0.1mm/step]
003 A4T - [2.0 to 25.0 / 2.0 / 0.1mm/step]
3. Main SP Tables-5
224