Ricoh Pro C5110S - Page 23

3201
[TnrDensity]
Sets Upper Limit Toner Density (wt%) for Toner Density Control Area.
001 Upper TC *ENG [1.0 to 15.0 / 9.5 / 0.1wt%/step]
002 Lower TC *ENG [1.0 to 15.0 / 4.0 / 0.1wt%/step]
3210
[TD.Sens:Vt :Disp]
Displays the latest TD Sensor Output
001 Current: K *ENG
[0.00 to 5.50 / 0 / 0.01V/step]
002 Current: C *ENG
003 Current: M *ENG
004 Current: Y *ENG
3220 [Vtcnt :Disp/Set]
001
Current: K *ENG [2.00 to 5.00 / 3.72 / 0.01V/step]
Displays/Sets Current TD Sensor Control Voltage (K).
002
Current: C *ENG [2.00 to 5.00 / 3.72 / 0.01V/step]
Displays/Sets Current TD Sensor Control Voltage (C).
003
Current: M *ENG [2.00 to 5.00 / 3.72 / 0.01V/step]
Displays/Sets Current TD Sensor Control Voltage (M).
004
Current: Y *ENG [2.00 to 5.00 / 3.72 / 0.01V/step]
Displays/Sets Current TD Sensor Control Voltage (Y).
3230 [Vtref :Disp/Set]
001
Current: K *ENG [0.00 to 5.00 / 2.70 / 0.01V/step]
Current TD Sensor Output Voltage Target Value: Displays/Sets Vtref (K).
002
Current: C *ENG [0.00 to 5.00 / 2.70 / 0.01V/step]
Current TD Sensor Output Voltage Target Value: Displays/Sets Vtref (C).
SP3-XXX (Process)
21