Ricoh Pro C5110S - Page 230

5212
[Page Numbering]
This program adjusts the position of the second side page numbers.
•
"- value" moves the page number positions to the left edge.
• "+ value" moves the page number positions to the right edge.
003 Duplex Printout Right/Left Position *CTL [-10 to 10 / 0 / 1mm/step]
004 Duplex Printout High/Low Position *CTL [-10 to 10 / 0 / 1mm/step]
5227 [Page Numbering]
201
Allow Page No. Entry *CTL [2 to 9 / 9 / 1/step]
Specify max. digits for “Job serial numbering start number” of optical text print.
202
Zero Surplus Stting *CTL
[0 or 1 / 0 / 1/step]
0:OFF
1:ON
Specify zero suppress for “Job serial numbering start number” of optical text print.
5302
[Set Time]
Adjusts the RTC (real time clock) time setting for the local time zone.
Examples: For Japan (+9 GMT), enter 540 (9 hours x 60 min.)
DOM: +540 (Tokyo)
NA: -300 (New York)
EU: + 60 (Paris)
CH: +480 (Peking)
TW: +480 (Taipei)
AS: +480 (Hong Kong)
002 Time Difference *CTL [-1440 to 1440 / 60 / 1min./step]
5305 [Auto Off Set]
101 Auto Off Limit Set *CTL [0 or 1 / 0 / 1/step]
5307 [Daylight Saving Time]
3. Main SP Tables-5
228