Ricoh Pro C5110S - Page 241

002
Access Password Max Num *CTL [50 to 200 / 200 / 1/step]
Limits the number of passwords used by the access exclusion and password attack
detection functions.
003
Monitor Interval *CTL [1 to 10 / 3 / 1 sec/step]
Sets the processing time interval for referencing user ID and password information.
5417 [Access Attack]
001
Access Permissible Number *CTL [0 to 500 / 100 / 1time/step]
Sets a limit on access attempts when an excessive number of attempts are detected for MFP
features.
002
Attack Detect Time *CTL [10 to 30 / 10 / 1sec/step]
Sets the length of time for monitoring the frequency of access to MFP features.
003
Productivity Fall Waite *CTL [0 to 9 / 3 / 1sec/step]
Sets the wait time to slow down the speed of certification when an excessive number of
access attempts have been detected.
004
Attack Max Num *CTL [50 to 200 / 200 / 1/step]
Sets a limit on the number of requests received for certification in order to slow down the
certification speed when an excessive number of access attempts have been detected.
5420
[User Authentication]
These settings should be done with the System Administrator.
• These functions are enabled only after the user access feature has been enabled.
001
Copy *CTL
[0 or 1 / 0 / 1/step]
0: Authentication ON
1: Authentication OFF
Determines whether certification is required before a user can use the copy applications.
002 Color Security Setting *CTL -
SP5-009 to 721 (Mode)
239