Ricoh Pro C5110S - Page 72

006
New Unit Conduction Detection
Times:Thres4
*ENG [0 to 9 / 4 / 1/step]
New Unit Conduction Detection Times Threshold
Threshold for Conduction Detection Times until when judged as New Unit
Judging as New Unit becomes fast if Conduction Detection Times decreases. Judging as
New Unit becomes slow if Conduction Detection Times increases.
011
Conduction Detection Times
Counter:K
*ENG [0 to 9 / 0 / 1/step]
Conduction Detection Times Counter (K)
Normal -> Mecha or Conduction Times Counter (K) when detecting New Unit
012
Conduction Detection Times
Counter:C
*ENG [0 to 9 / 0 / 1/step]
Conduction Detection Times Counter (C)
Normal -> Mecha or Conduction Times Counter (C) when detecting New Unit
013
Conduction Detection Times
Counter:M
*ENG [0 to 9 / 0 / 1/step]
Conduction Detection Times Counter (M)
Normal -> Mecha or Conduction Times Counter (M) when detecting New Unit
014
Conduction Detection Times
Counter:Y
*ENG [0 to 9 / 0 / 1/step]
Conduction Detection Times Counter (Y)
Normal -> Mecha or Conduction Times Counter (Y) when detecting New Unit
015
Near End Distance:K *ENG [0 to 999999999 / 0 / 1cm/step]
OPC Distance (K): Save SP
Saves and stores the value for PM Counter when detecting Mecha.
016
Near End Distance:C *ENG [0 to 999999999 / 0 / 1cm/step]
OPC Distance (C): Save SP
Saves and stores the value for PM Counter when detecting Mecha.
1. Main SP Tables-3
70