Ricoh Pro C5110S - Page 723

214
Buffer Pass Unit:CTB_H8S-PortD ENG [0 to 255 / 0 / 1/step]
Buffer Pass Unit CTB_H8S-PortD
215
Buffer Pass Unit:CTB_H8S-PortE ENG [0 to 255 / 0 / 1/step]
Buffer Pass Unit CTB_H8S-PortE
6011 [1-Pass ADF INPUT Check]
001
Original Length 1 (B5 Sensor) ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for ADF. Turns to "1" when the original is in Sensor part.
002
Original Length 2 (A4 Sensor) ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for ADF. Turns to "1" when the original is in Sensor part.
003
Original Length 3 (LG Sensor) ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for ADF. Turns to "1" when the original is in Sensor part.
004
Original Width 1 ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for ADF. Turns to "1" when the original is in Sensor part.
005
Original Width 2 ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for ADF. Turns to "1" when the original is in Sensor part.
006
Original Width 3 ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for ADF. Turns to "1" when the original is in Sensor part.
007
Original Width 4 ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for ADF. Turns to "1" when the original is in Sensor part.
008
Original Width 5 ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for ADF. Turns to "1" when the original is in Sensor part.
009
Original Detection ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for ADF. Turns to "1" when the original is detected.
010
Separation Sensor ENG [0 or 1 / 0 / 1/step]
Acquires Sensor information for ADF. Turns to "1" when the original is in Sensor part.
Input Check Table
721