Ricoh Pro C5110S - Page 782

118
Exit/Inverter Mtr:CWW:Exit
Speed1:Low Speed
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
119
Exit/Inverter Mtr:CW:Exit
Speed2:Std Speed
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
120
Exit/Inverter Mtr:CW:Exit
Speed2:Mid Speed
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
121
Exit/Inverter Mtr:CW:Exit
Spd2:Mid-Low Spd *D136 only
ENG [0 or 1 / 0 / 1/step]
This SP is only for D136 machine. Executing this SP on D135/D137/D138 machines may
cause SC error.
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
122
Exit/Inverter Mtr:CW:Exit
Speed2:Low Speed
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
123
Exit/Inverter Mtr:CWW:Exit
Speed2:Std Speed
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
124
Exit/Inverter Mtr:CWW:Exit
Speed2:Mid Speed
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
125
Exit/Inverter Mtr:CWW:Exit
Spd2:Mid-Low Spd *D136 only
ENG [0 or 1 / 0 / 1/step]
This SP is only for D136 machine. Executing this SP on D135/D137/D138 machines may
cause SC error.
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
7. Input and Output Check
780