Ricoh Pro C5110S - Page 784

136
Duplex/Inverter Mtr:CW:Exit
Speed1:Std Speed
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
137
Duplex/Inverter Mtr:CW:Exit
Spd1:Mid Spd
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
138
Duplex/Inverter Mtr:CW:Exit
Spd1:Mid-Low Spd *D136 only
ENG [0 or 1 / 0 / 1/step]
This SP is only for D136 machine. Executing this SP on D135/D137/D138 machines may
cause SC error.
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
139
Duplex/Inverter Mtr:CW:Exit
Spd1:CW:Low Spd
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
140
Duplex/Inverter Mtr:CW:Dup
Speed:Std Speed
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
141
Duplex/Inverter Mtr:CW:Dup
Speed:Mid Speed
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
142
Duplex/Inverter
Mtr:CW:Mid:DupSpd:Mid-
LowSpd *D136 only
ENG [0 or 1 / 0 / 1/step]
This SP is only for D136 machine. Executing this SP on D135/D137/D138 machines may
cause SC error.
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
143
Duplex/Inverter Mtr:CW:Low
Speed
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
7. Input and Output Check
782