Ricoh Pro C5110S - Page 785

144
Duplex/Inverter Mtr:Exit
Speed1:Std Speed
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
145
Duplex/Inverter Mtr:Exit
Speed1:Mid Speed
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
146
Duplex/Inverter Mtr:Exit
Spd1:Mid-Low Spd *D136 only
ENG [0 or 1 / 0 / 1/step]
This SP is only for D136 machine. Executing this SP on D135/D137/D138 machines may
cause SC error.
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
147
Duplex/Inverter Mtr:Exit
Spd1:CWW:Low Spd
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
148
Duplex/Inverter Mtr:CW:Dup
Speed:Std Speed
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
149
Duplex/Inverter Mtr:CWW:Dup
Speed:Mid Speed
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
150
Duplex/Inverter
Mtr:CWW:Mid:DupSpd:Mid-
LowSp *D136 only
ENG [0 or 1 / 0 / 1/step]
This SP is only for D136 machine. Executing this SP on D135/D137/D138 machines may
cause SC error.
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
151
Duplex/Inverter Mtr:CWW:Low
Speed
ENG [0 or 1 / 0 / 1/step]
Operates load for Motors and SOL etc. Pay attention to ON time due to forced load-ON.
Output Check Table
783