CIP Training Pro C5200 series
Adjustment Settings for Operators
Line Speed Adjustment
To prevent the paper becoming too tight or too slack during transfer, set all the line speed adjustment
settings for the paper transfer path to the same value. However, if adjustment of individual items is
necessary to correct image degradation, perform the adjustment according to the instructions in
Troubleshooting.
061: [Fusing Belt Feed Speed]
Adjust the fusing belt's speed.
Jk^llU%Wmhbg\k^Zl^ma^li^^]Zg]UƽWmhk^]n\^bm(
Setting Items Max. Value Min. Value Step Unit
[Fusing Belt Feed Speed] +*(* '+*(* *(+
066: [Paper Transfer Belt Feed Speed]
Adjust the transfer roller's speed.
Jk^llU%Wmhbg\k^Zl^ma^li^^]Zg]UƽWmhk^]n\^bm(
Setting Items Max. Value Min. Value Step Unit
[Paper Transfer Belt Feed Speed] 1.0 '+(* *(+
067: [First Paper Motor Feed Speed]
Adjust the first paper feed motor's speed.
Jk^llU%Wmhbg\k^Zl^ma^li^^]Zg]UƽWmhk^]n\^bm(
Setting Items Max. Value Min. Value Step Unit
[First Paper Motor Feed Speed] 3.0 '-(* *(+
068: [Second Paper Motor Feed Speed]
Adjust the second paper feed motor's speed.
Jk^llU%Wmhbg\k^Zl^ma^li^^]Zg]UƽWmhk^]n\^bm(
To Next Page
Loading...
